The RoSPA Health and Safety Awards is the largest occupational health and safety awards programme in the UK and the accolade acknowledges the hard work going on behind the scenes at BSW Timber to ensure employee safety.

A new auditing system was developed and built by the firm’s ESH team with a view to putting more focus on legislative requirements and Approved Codes of Practice (ACoP) compliance across BSW Timber’s sawmills. The audits were able to identify procedural weaknesses which resulted in group procedures and technical references being updated or rewritten and making roles and responsibilities clearer.

Additionally, improved communication, co-ordination and co-operation between the mill teams has resulted in a more focussed scrutiny of ESH KPIs for the betterment of the entire BSW Timber team.

Wayne Jones, BSW Group’s ESH Manager, said: “We are delighted to have achieved this award on behalf of the company. It is testimony to the hard work and ambitions of the senior management, ESH and sawmilling teams to improve our performance in reducing risk to employees and liability to the company. We look forward to continuing to build on our initial success and generate even better standards to demonstrate our position as market leaders in our industry.

“Our commitment to ensuring efficient operations is centred around the safety of our workforce. This is underpinned by our drive to reduce risk and liability, which in turn reduces accidents, employee absence and staff turnover. We believe the RoSPA award provides an improved reputation among suppliers and partners, as well as increasing productivity and profitability, but most importantly, employees are safer, healthier and better motivated.”

The RoSPA programme recognises organisations’ commitment to continuous improvement in the prevention of accidents and ill health at work, looking at entrants’ overarching health and safety management systems, including practices such as leadership and workforce involvement.

Julia Small, RoSPA’s Achievements Director, said: “Accidents at work and work-related ill health don’t just have huge financial implications or cause major disruption – they significantly impact an individual’s quality of life. That’s why good safety performance deserves to be recognised and rewarded.

“We are thrilled that BSW Timber has won a RoSPA Award and would like to congratulate them on showing an unwavering commitment to keeping their employees, clients and customers safe from accidental harm and injury.”

The RoSPA Awards scheme is the longest running of its kind in the UK, and receives entries from organisations across the globe, making it one of the most sought-after achievement awards for the health and safety industry. To find out more about BSW Timber, visit www.bsw.co.uk

Building, Design & Construction Magazine | The Choice of Industry Professionals 

The post BSW Timber scoops international health and safety RoSPA accolade appeared first on BDC Magazine.

By the time August arrives, it’s official – school is out for summer. For students and staff alike, the summer holiday is a precious period of recreation and recuperation, but for most education facilities, the annual break presents an opportune time to complete much needed refurbishment and remedial work.

Fire safety is a core area for concern in particular, where according to the Fire Industry Association (FIA), one in 20 schools experience fire in their buildings. Fires can cause school buildings immeasurable damage, and in response – and as stated under the Regulatory Reform (Fire Safety) Order 2005 – designated responsible persons must conduct ongoing risk assessments to help identify potential hazards within their premises.

Yet, in 2022, research conducted by Allegion UK into the impact of fire doors in education facilities found that almost half of decision makers had encountered issues with fire doors in their buildings, with over half of respondents also revealing they were not aware of fire door maintenance procedures. As such, responsible persons are urged to make the most of their allotted time and budgets this summer, extending the service life of fire door hardware to help ensure students, staff and visitors are safe and secure when doors once again open for the new term.

School Life

School buildings are inherently diverse environments. While no two facilities may be the same, it is a legal requirement under British and European law for all academic settings to possess operational fire door sets. New regulation continues to draw focus on fire safety in school buildings too, with guidance from the Building Safety Act shining the light on higher-risk buildings of 18 metres in height (or at least 7 storeys tall), with certain education facilities meeting the criteria and thus required to register as high-risk by 1^st October 2023.

Naturally, school classrooms and corridors are often bustling with movement and during term time, in high traffic areas, fire doors can be used anywhere between 100’s to 1000’s of times each day. Over time, daily use inevitably leads to wear and tear on fittings and in some cases, fire doors may even experience levels of misuse and abuse.

Take the end of each school day for example, where fire doors and their hardware are frequently put to the test as students (and staff) aim to leave the premises quickly. When doors are opened and closed with force, hardware elements can become tired, with poorer quality or incorrectly specified door hardware more prone to damage. To help prevent excessive wear and damage in busier areas, schools may benefit from electromagnetic hold-open devices, which combine wall magnets with existing door closers to aid ease of access and reduce any unnecessary roughness. Similarly, door closers with backcheck control will slow the motion of a door, preventing or minimising contact damage.

In the circumstance of a fire, it’s critical that a fire door closes independently and to completion. Damaged door hardware compromises the performance of a fire door, and as such, designated responsible persons, as part of their responsibilities, must ensure escape routes are clear and fire door sets are operating as intended, making note of and replacing any damaged door hardware in the process

Protection on a budget

While school buildings are closed, decision makers are gifted a period of low foot traffic and a sufficient amount of time to undertake compulsory maintenance periods without interruption. Whereas maintenance is  key, research from the Guild of Architectural Ironmongers (GAI) has previously revealed education buildings to have the highest average maintenance spend attributed to door hardware. Furthermore, after reviewing school spending as a whole, the Institute for Fiscal Studies (IFS) estimated that school costs would increase by 6% across 2022/23.

To support schools, the government continues to invest in projects for new and refurbished buildings through its School Rebuilding Programme. Retrofit projects for example, when approached professionally, can make a considerable difference to a building’s operation – improving its efficiency and fire protection and all without needing to replace the existing fire safety infrastructure. Although, when completing retrofit projects, decision makers must consider high quality, like for like alternatives as using sub-standard components may have the adverse effect – further raising replacement costs later down the line and potentially breaching fire safety regulations in the process.

With many academic groups already fearing budget cuts may affect their ability to run facilities as planned, responsible persons are also urged to review their maintenance programmes. Primarily, decision makers can look to decrease their total maintenance spend by choosing more durable products at the product selection stage. The use of higher quality, correctly specified and installed door hardware products will help to lower the rate of sustained wear and damage and thus reduce the costs associated with repair and replacements. The Code for Construction Product Information (CCPI) is an accredited programme designed to present clear, accurate and up-to-date product information, and can assist decision makers in education by helping them to select trusted hardware that conforms to UKCA and CE certifications.

Above all, responsible persons must ensure fire doors and their hardware are routinely checked throughout the entirety of the school year, adjusting components where necessary to preserve the operation of fire doors. But while schools are closed, there’s truly no better time to get a head start on preparations and updated regulations – responsible persons must only seek professional advice where unsure.

How Allegion UK can Help

Allegion UK has a wealth of resources to help responsible persons undertake product selection, installation and maintenance checks on fire doors and hardware. For information on product selection and installation, please speak to our experts or head to our download centre for technical fitting instructions. For post-installation support, Allegion’s simple toolkit provides information and tips on detecting potential faulty doors and poor installation, a guide to the EN classification system and a safety checklist. There’s also an option to order a free door gap tester or download Allegion’s general guide to service and maintenance for free.

Building, Design & Construction Magazine | The Choice of Industry Professionals 

The post Summer Safeguarding: Protecting Schools with Reliable Fire Door Hardware appeared first on BDC Magazine.

May import volumes of softwood, hardwood, plywood, particleboard, and engineered wood products were higher than in any of the preceding months of 2023.

Softwood imports have proved particularly buoyant, with volumes in May 8% higher than the 2023 average.

Overall volumes, however, remain below 2022 levels. Total import volume in the first five months of 2023 was 378,000m³ lower, or 8% less than over the same period in 2022.

In the long term, monthly variations appear to be stabilising following three years of dramatic fluctuation.

TDUK Head of Technical and Trade, Nick Boulton, said:

“The overall economic picture for the UK is gloomy, with sticky inflation and high interest rates reducing confidence in the construction sector.

“This is seen in the latest CPA forecast, with crucial timber demand driving sectors like private housing and RMI predicted to decline by 19% and 11% respectively, likely returning to growth in 2024.

“However, in 2023, timber import patterns seem to be bucking these downward trends, with volumes witnessing growth in four of the five months so far this year. May even saw growth across all the major import categories something we certainly would not have predicted at the beginning of the year. 

“It also appears the dramatic peaks and troughs of 2020-2022 have subsided. Monthly variations now seem steadier and more similar to the pre-covid years.

“Though the overall economic outlook is undeniably negative, these latest figures suggest there is room for some cautious positivity heading into Q3.”

Members can read the full statistics report here.

Building, Design & Construction Magazine | The Choice of Industry Professionals 

The post Timber imports bounce back in May appeared first on BDC Magazine.

Ideally suited for commercial build projects, the new range allows for a more consistent design scheme and can be easily incorporated into a variety of interiors. The laminate finish also carries significant benefits in terms of maintenance and durability, offering resistance to water, impacts and scratches, and is easy to clean and maintain with no chemical products required.

In addition to ReadyFIT internal and communal doorsets, the enhanced laminate designs will also form part of JELD-WEN’s SecureFIT and SecureSET ranges, meaning they are dual tested to provide 30-minute fire, smoke and security protection as listed under the Certifire and CertiSecure schemes – offering customers a complete and fully certified interior doorset solution. 

Ruth Deardon, UK Product Line Manager at JELD-WEN, said:

“With a highly durable and long-lasting finish, our new laminate collection is well-suited for commercial builds, helping to create a high-quality and consistent design scheme that is stylish as well as practical. All finishes are available with a FD30 fire door rating, giving customers complete assurance in the safety and certification of every doorset.”

In line with JELD-WEN’s commitment to provide high-quality, reliable and easy-to-install products, laminate doorsets are delivered fully finished, with no painting or staining required on site, and feature colour-matched edge banding for a seamless finish.

All doorsets are available either as a solid panel or with glazing, with 11 clear glazed designs to choose from. 

Ruth added:

“Expert craftsmanship, premium quality and exceptional design is behind every JELD-WEN doorset, and our new laminate collection is no exception. As well as a market-leading product range, customers can also benefit from our decades of industry knowledge and technical expertise, as well as a dedicated sales team to provide support at every stage of the project.”   

Every JELD-WEN customer is supported by a specialist, UK-based account management team who can help streamline the sales process from start to finish, as well as a nationwide customer service team to provide solutions to any query and ensure every order is delivered on schedule and in budget.

For more information about JELD-WEN’s laminate doorset range, call 0345 122 2891 or email ukdoorsets@jeldwen.com

See more at www.jeld-wen.co.uk 

Building, Design & Construction Magazine | The Choice of Industry Professionals 

The post The UK’s leading door manufacturer JELD-WEN has expanded its product portfolio with the launch of a new laminate range appeared first on BDC Magazine.

The Ultra Low Emission Zone (ULEZ) operates 24 hours a day, 7 days a week, 365 day of the year (except 25 December) and has been implemented in a bid to make the capital’s air, cleaner.  The zone currently covers all areas within the North and South Circular Roads (with the exception of the A406 and A205).  If a vehicle does not meet the ULEZ emissions standards, the driver will pay a £12.50 daily charge to drive within the zone.  Currently, this applies to cars, motorcycles, vans, minibuses and specialist vehicles (up to and including 3.5 tonnes).  Lorries, vans or specialist heavy vehicles (all over 3.5 tonnes) and buses, minibuses and coaches (all over 5 tonnes) do not need to pay the ULEZ charge.  In addition, owners of non-UK registered vehicles will also need to meet the ULEZ emissions standards or pay the daily charge.   

Although support is currently available, for example, a £110 million scrappage scheme has been launched to help fund the purchase of new vehicles that are ULEZ-compliant, and under the new scrappage fund, sole traders and tradespeople working for a micro-business (those with 10 employees and under) have been granted extra provisions of between £5,000-£9,000 to help transition to a low-polluting or EV alternative, nevertheless, paying a £12.50 daily fee for vehicles not meeting minimum requirements equates to more than £3,000 a year per vehicle.  

“Whilst we fully support the need to cut emissions and protect the environment, we urge the Mayor of London, Sadiq Khan, to consider alternative ways to limit the impact that ULEZ will have on businesses in the construction industry including that he reassess this extension,” explains DHF’s Commercial Director, Patricia Sowsbery-Stevens. 

“ The planned extension will seriously impact the income of construction businesses, and at a time when inflation remains very high and customers are delaying or cancelling projects due to higher costs and limited budgets, this will make the commercial environment even more challenging,” she continues.
  “ULEZ will increase the cost of construction workers using vans to go to work, could cause construction workers to work longer hours to limit the number of times they need to travel into the centre, could cause construction companies to lose work due to the need to increase their prices to cover this additional cost on top of the cost-of-living crisis and increasing transport costs, and may potentially undermine the Mayor of London’s plea for construction workers to work in the Capital to help improve the city’s housing stock. 
DHF cannot stress enough the considerable impact, not just on construction businesses, but on all businesses that have a legitimate reason to travel into the Ultra Low Emission Zone, and we hope that alternative options will be considered that prioritise small-to-medium-sized businesses operating in the capital.”

Building, Design & Construction Magazine | The Choice of Industry Professionals 

The post DHF offers support to members impacted by London’s Ultra Low Emission Zone appeared first on BDC Magazine.

• A quarter of properties were reported to have faulty entrance doors.

• Only 63% of landlords felt the level of security their properties offered was ‘adequate’. 

New research from leading door manufacturer JELD-WEN reports high levels of security breaches in social housing properties, and the challenges of maintaining safety protocols in multi-occupancy developments. 
   
The survey collated responses from housing associations and social housing landlords to investigate the level of safety and security provided across multi-occupancy properties in the UK – including apartment blocks and communal living spaces – and to highlight the challenges facing the sector. 

It found that 59% of respondents had security breaches in their properties in the last 12 months, with more than a third (34%) reporting to have had more than 20 breaches. 

The main cause of security breaches was reportedly due to a tenant mistake or issue (e.g. leaving a communal door open), which accounted for 34% of all breaches, followed by faulty entrance doors for 26% of properties. 

Among other industry issues, only 22% of respondents ranked security as a top priority for their organisation. The main concerns around delivering high-quality security included:

• a lack of understanding among tenants about security protocols (46%) 

• expense (37%) 

• a lack of understanding within procurement about what security products are in the market (21%)

A high proportion (60%) of landlords had received tenant concerns about the level of security offered by their property, citing poor locks or closers on main doors, security systems needing repairs, non-residents gaining access, and anti-social behaviour resulting in damage to entrance doors.

Of those surveyed, only 63% felt that the security measures in place in their residential blocks were adequate. Yet despite this, and the high level of concern from tenants, only 13% of organisations surveyed are considering smart locks on communal doors – such as wifi-enabled or keyless entry locks – compared to the 54% who aren’t.

Commenting on the findings, Glyn Hauser, R&D Senior Group Manager at JELD-WEN, said:

“The survey results are a clear indicator of two major challenges facing the social housing sector today – engaging with tenants on the importance of adhering to security protocols, and instilling the responsibility of landlords and developers to ensure doorsets offer an enhanced level of security as the first stage of protection. 

“It’s concerning to hear that more than a third (37%) of social housing landlords and providers think that the security measures in place in their properties are inadequate. With one burglary taking place every 13 seconds in the UK, this is simply not good enough. 

“A secure flat entrance doorset is, arguably, the most effective first line of defence, and by investing in a purpose-built, certified doorset, we believe that landlords can elevate safety standards and rebuild confidence within their properties, so that tenants can feel safe and secure in their homes.”

The research also reports challenges in delivering high quality fire safety in multi-occupancy properties, despite fire safety regulations attracting continued scrutiny and an increasing pressure on developers and landlords to ensure better standards for residents. 

Nine in 10 respondents had an inspection on internal fire doors in the last two years, with 50% finding a flaw. These include poorly fitted doors, damage to door closers and hardware improvements required.

Choosing the correct doorset for a project can be a daunting task, thankfully JELD-WEN has a helpful guide about choosing a secure flat entrance doorset here.

Glyn continues:

“Understandably, the housing sector continues to face many challenges, but everyone has a right to feel safe at home and the urgent need to improve fire safety and security standards cannot fall by the wayside. It has never been more important to ensure properties have the correct products and protocols in place, and by investing in a certified, purpose-built doorset, landlords have the best chance of reducing risk and keeping their tenants secure.”

As the UK’s largest manufacturer of high quality timber interior doors and doorsets, JELD-WEN offers a range of dual-purpose, certified interior doorsets providing assurance that both security and fire safety have been independently evaluated by specialists.

The JELD-WEN SecureFIT and SecureSET flat entrance doorsets are dual tested and certified to provide 30-minute fire, smoke and security protection as listed under the Certifire and CertiSecure certification scheme, giving complete assurance to social housing providers, developers and construction professionals that the people, property and assets within the building are safe and secure. 

The post New Research Highlights Security Challenges in Social Housing Properties appeared first on BDC Magazine.

Across the globe, the decarbonisation of our planet has become a focal point for construction. Between legislative requirements and market demand, industry leaders remain under constant pressure to reach environmental targets and upon exploring some of the more distinct routes, it’s important to consider what more can be done with construction materials.

Research has shown that approximately 55% of extracted raw materials are used to develop the built environment, with buildings further contributing to 40% of annual global carbon emissions. With that, there is an onus on decision makers to make astute choices, opting for more durable, environmentally conscious building products that reduce the need for repeat manufacturing and improve resource efficiency.

Yet, the perceived value and cost of such products remains a stumbling block, where according to an NBS 2022 Sustainable Futures Report, more than a third of construction professionals cite the application of sustainable products is restricted by cost optimisation decisions. While cost will always remain an influencing factor in construction, there is a clear need to change the notion of ‘perceived value’ in sustainable construction, and for that, door hardware can play a starring role.

Value added

At surface level, architectural ironmongery is perhaps lesser recognised for its potential environmental benefits when compared to its significance in functionality, safety and security. Between fire safety, ease of movement and quality of life, door hardware plays an integral role in the operation of our built environment. Still, with hardware elements constructed from materials such as iron, aluminium and timber, and with many touchpoints found on each construction project, from an environmental viewpoint, there is tangible value to be found when using correctly specified, durable solutions.

In high traffic buildings, the day-to-day use of doors can often lead to wear and tear on fittings, which in turn creates the need for replacement hardware. Trusted manufacturers aim to extend the lifecycle of ironmongery, providing more robust door hardware that significantly reduces the need for replacements over time due to wear and damage. The appropriate designated standard for mechanical testing for a controlled door closing devices is EN1154, which ensures closers are tested to endure use for over 500,000 cycles for example – with some manufacturers choosing to extend the testing to above and beyond. The use of these certified solutions incidentally helps building environments moderate the amount of resources being consumed at the manufacturing stage, while also minimising the waste associated with replacement products.

Although sustainable construction projects may incur short-term, budget-stretching costs, the potential ROI associated with better-quality products is also much greater over the full building lifecycle. By removing the inevitability of sourcing substitute products on multiple occasions throughout a building’s lifecycle, costs can be kept to a minimum post project completion. As such, decision makers are urged to adopt the use of optimised door hardware at the initial design stages – ensuring products are correctly specified and fit to last from the moment a project’s doors open.

Tracing footprints

In 2022, research conducted by Allegion UK into the impact of fire doors in education and healthcare sectors revealed sustainability and product traceability to be important to 78% of decision makers in education settings and 50% of decision makers in healthcare settings respectively.

Today, more than ever, higher standards are expected throughout the entirety of construction projects as stakeholders continue to place personal value on sustainability, product traceability and transparency. In recognition of this, manufacturers can choose to enrol in programmes that focus on sustainability and product credentials, further assisting decision makers throughout the product selection process by offering transparent and independently verified information.

The Environmental Product Declaration (EPD) programme for example, is a complete mapping of a product’s environmental footprint and has become a standardised way for manufacturers to communicate the environmental impact associated with a product. For an EPD to be reported, products are subject to a full Life Cycle Assessment (LCA) and must meet Product Category Rules (PCR) in the process, where upon completion, they are declared as acceptable in building rating schemes such as BREEAM.

As such, EPD’s have become a signal of intent from manufacturers, highlighting their commitment to measuring and reducing the environmental impact of a door hardware product, and alongside environmental management standards such as ISO 14001, EPD’s are becoming an expected standard for hardware products.

A combined effort is needed if the industry is to meet its full environmental responsibilities. Sustainable door hardware is only one piece of the puzzle. Yet, with several value points to offer, decision makers must be willing to look past cost barriers where possible and choose to adopt environmentally responsible door hardware products as a long-term investment for construction and our planet.

How Allegion UK is Driving Change

Allegion UK is committed to supporting sustainability in construction. We are proud to be helping create a more transparent and sustainable global industry by proactively participating in the EPD programme, with full EPD documentation available for download on Briton products, based on ISO 14025 and EN 15804 environmental declarations, from the Allegion and Briton websites.

We continue to focus on making regular improvements in sustainability management systems, enhancing product life cycles through increased hardware durability, reducing natural resource usage and improving the recycling and reuse of materials, all in a bid to help minimise our environmental impact as a manufacturer.

The post The True Value of Sustainable Hardware appeared first on BDC Magazine.

“A Product Data Template is a common way of describing essential product characteristics that can be traced to a credible source such as a product standard,” explains Michael Skelding, General Manager & Secretary at DHF.  “Once a manufacturer completes a PDT, the output is a Product Data Sheet summarising the performance and other technical characteristics of a construction product.  Structuring product information in this way enables more consistent, audience-specific information, and identifies all the performance information required to make informed choices about construction products.”
 

The doorset PDT has been published by the shadow Fenestration Relevant Authority, a group of 14 organisations and trade associations that have come together to provide PDTs for the sector, which DHF is represented.  This means that the industry will now be able to create a coordinated set of Product Data Sheets for any doorsets involved in their projects.  
 

Hanna Clarke, digital and policy manager at the Construction Products Association (CPA) said:
 

“Structured product information is absolutely vital to a joined-up construction and built environment sector.  But the key to arriving at this information is consensus, and the CPA is pleased to see that the trade associations in the fenestration area have come together to form a shadow Relevant Authority as per the processes identified in the LEXiCON project. 
 

“It is these consensus processes and due diligence that will allow all those using the template and resulting product data sheets to trust that the information has been appropriately considered and will have longevity in application.”
 

“This PDT is part of an ongoing programme of works in this field undertaken by the Fenestration Relevant Authority, with window hardware as the next project.  DHF is thrilled to contribute to this and future PDTs to ensure that the Golden Thread is embedded into the construction industry”, concludes Michael.
 

The following organisations are represented on the shadow Fenestration Relevant Authority: Guild of Architectural Ironmongers (GAI), British Woodworking Federation (BWF), Glass and Glazing Federation (GGF), British Standards Institution (BSI), Council for Aluminium in Building (CAB), Construction Products Association (CPA), Door and Hardware Federation (DHF), Association of Composite Door Manufacturers (ACDM), British Blind and Shutters Association (BBSA), National Association of Rooflight Manufacturers (NARM), British Plastics Federation (BPF), Automatic Door Suppliers Association (ADSA) Centre for Windows and Cladding Technology (CWCT) and Steel Window Association (SWA).
  The PDT is available to download here: https://bit.ly/DHF-GenInfo

Building, Design & Construction Magazine | The Choice of Industry Professionals 

The post DHF takes another step toward the Golden Thread, with ‘Product Data Templates’ for doorsets appeared first on BDC Magazine.

Robust UK offer two product ranges with Secured by Design accreditation – TUFF-DOR and SECUR-DOR. Every security door is specially constructed to individual project requirements and features internal reinforcement designed to resist a sustained attack from a wide range of tools, offering a physical barrier to deter and delay intruders for a specified period of time.

Paul Williams, Robust UK, said: “Our continued partnership with SBD has allowed us to provide our customers with a high level of security and peace of mind that our steel door solutions are secure and of the highest quality. The support and expertise of the Designing Out Crime Officers (DOCOs) is crucial in offering an independent security assessment, allowing end users to know that the Police Preferred Specification has been adhered to.”

Hazel Goss, Secured by Design, commented: “It has been a pleasure to renew contracts with Robust, who have been members of Secured by Design since 2013. They offer a great range of Steel doorsets covering various security ratings and styles. I am looking forward to many more years working alongside them.”

You can find out more about Robust UK and their Secured by Design accredited products on their dedicated member page.

Secured by Design (SBD) is owned by the UK Police Service with the specific aim of reducing crime and increasing safety for businesses and individuals.

SBD seeks to improve the physical security of buildings and the surrounding area using products such as doors, windows, locks and walling systems along with fencing systems that meet the SBD Police Preferred Specification security requirements.

SBD have many partner organisations, ranging from the Department for Levelling Up, Housing and Communities through to local authorities, housing associations, developers and manufacturers and work closely with standards and certification bodies.

SBD is the only way for companies to obtain police recognition for security-related products in the UK, through the Police Preferred Specification – a product-based accreditation scheme developed over 20 years ago, which provides a recognised standard for all security products that effectively deter and reduce crime. SBD work with manufacturers and standards authorities to ensure that security standards are current and updated to keep pace with emerging crime trends. Learn more about Secured by Design and our member companies at: https://www.securedbydesign.com/

The post Robust UK renew membership with Secured by Design appeared first on BDC Magazine.

The Builders’ Merchant Federation has joined forces with Builders’ Merchants’ News to compile a list of the Top 100 Supplier Influencers in the merchant sector, based on involvement, presence and commitment to the industry. Making the list is not one, but two members of the West Fraser team, confirming the company’s position of a supplier merchants want to do business with.

West Fraser’s nominees Sanjit Dosanjh, National Sales Manager, and Simon Woods, European Sales, Marketing & Logistics Director have been prominent voices in the merchant sector.  West Fraser is a long-term supporter of merchant awards and Simon Woods represents the wood-based panel industry on the Builders Merchant Building Index (BMBI) panel of industry experts.

Speaking about the nominations, Sanjit said “It is a great feeling to receive recognition for the relationships and influence we have with the merchant industry. We are proud of our strong relationships, built over many years on a solid foundation of good communication with our customer base and being able to support our customers has been a priority.  The merchant industry is a great place to be in and I encourage anyone that is thinking of making the move into the industry to do it.”

For further information, call 01786 812 921 or visit https://uk.westfraser.com/

Building, Design & Construction Magazine | The Choice of Industry Professionals 

The post Accolades for West Fraser’s relationship with merchant sector appeared first on BDC Magazine.